socket_recv

(PHP 4 >= 4.1.0, PHP 5, PHP 7, PHP 8)

socket_recv从已连接的 socket 接收数据

说明

socket_recv ( Socket $socket , string|null &$data , int $length , int $flags ) : int|false

函数 socket_recv()socket 中接受长度为 length 字节的数据,并保存在 data 中。 socket_recv() 用于从已连接的 socket 中接收数据。除此之外,可以设定一个或多个 flags 来控制函数的具体行为。

data 是传引用的,因此必须以变量的形式,指定到参数列表。从 socket 中接收到的数据将会保存在 data 中。

参数

socket

参数 socket 必须是一个由 socket_create() 创建的 Socket 实例。

data

从 socket 中获取的数据将被保存在由 data 指定的变量中。 如果有错误发生,如链接被重置,数据不可用等等, data 将被设为 null

length

长度最多为 length 字节的数据将被接收。

flags

flags 的值可以为下列任意 flag 的组合。使用按位或运算符(|)来 组合不同的 flag。

可用的 flags
Flag 描述
MSG_OOB 处理超出边界的数据
MSG_PEEK 从接受队列的起始位置接收数据,但不将他们从接受队列中移除。
MSG_WAITALL 在接收到至少 length 字节的数据之前,造成一个阻塞,并暂停脚本运行(block)。但是, 如果接收到中断信号,或远程服务器断开连接,该函数将返回少于 length 字节的数据。
MSG_DONTWAIT 如果指定了该 flag,函数将不会造成阻塞,即使在全局设置中指定了阻塞设置。

返回值

socket_recv() 返回一个数字,表示接收到的字节数。如果发生了错误,则返回 false 错误码可使用 socket_last_error() 接收。也可使用函数 socket_strerror() 来取得关于错误的文字描述。

更新日志

版本 说明
8.0.0 socket is a Socket instance now; previously, it was a resource.

范例

Example #1 socket_recv() 范例

该范例简单地使用 socket_recv() 重写了 范例 中的 第一个例子。

<?php
error_reporting
(E_ALL);

echo 
"<h2>TCP/IP Connection</h2>\n";

/* Get the port for the WWW service. */
$service_port getservbyname('www''tcp');

/* Get the IP address for the target host. */
$address gethostbyname('www.example.com');

/* Create a TCP/IP socket. */
$socket socket_create(AF_INETSOCK_STREAMSOL_TCP);
if (
$socket === false) {
    echo 
"socket_create() failed: reason: " socket_strerror(socket_last_error()) . "\n";
} else {
    echo 
"OK.\n";
}

echo 
"Attempting to connect to '$address' on port '$service_port'...";
$result socket_connect($socket$address$service_port);
if (
$result === false) {
    echo 
"socket_connect() failed.\nReason: ($result) " socket_strerror(socket_last_error($socket)) . "\n";
} else {
    echo 
"OK.\n";
}

$in "HEAD / HTTP/1.1\r\n";
$in .= "Host: www.example.com\r\n";
$in .= "Connection: Close\r\n\r\n";
$out '';

echo 
"Sending HTTP HEAD request...";
socket_write($socket$instrlen($in));
echo 
"OK.\n";

echo 
"Reading response:\n\n";
$buf 'This is my buffer.';
if (
false !== ($bytes socket_recv($socket$buf2048MSG_WAITALL))) {
    echo 
"Read $bytes bytes from socket_recv(). Closing socket...";
} else {
    echo 
"socket_recv() failed; reason: " socket_strerror(socket_last_error($socket)) . "\n";
}
socket_close($socket);

echo 
$buf "\n";
echo 
"OK.\n\n";
?>

The above example will produce something like:

<h2>TCP/IP Connection</h2>
OK.
Attempting to connect to '208.77.188.166' on port '80'...OK.
Sending HTTP HEAD request...OK.
Reading response:

Read 123 bytes from socket_recv(). Closing socket...HTTP/1.1 200 OK
Date: Mon, 14 Sep 2009 08:56:36 GMT
Server: Apache/2.2.3 (Red Hat)
Last-Modified: Tue, 15 Nov 2005 13:24:10 GMT
ETag: "b80f4-1b6-80bfd280"
Accept-Ranges: bytes
Content-Length: 438
Connection: close
Content-Type: text/html; CHARSET=gb2312

OK.

User Contributed Notes

Anonymous 10-Mar-2021 09:49
<?php

namespace Safe;

use
Safe\Exceptions\SocketsException;

/**
 * After the socket socket has been created
 * using socket_create, bound to a name with
 * socket_bind, and told to listen for connections
 * with socket_listen, this function will accept
 * incoming connections on that socket. Once a successful connection
 * is made, a new socket resource is returned, which may be used
 * for communication. If there are multiple connections queued on
 * the socket, the first will be used. If there are no pending
 * connections, socket_accept will block until
 * a connection becomes present. If socket
 * has been made non-blocking using
 * socket_set_blocking or
 * socket_set_nonblock, FALSE will be returned.
 *
 * The socket resource returned by
 * socket_accept may not be used to accept new
 * connections. The original listening socket
 * socket, however, remains open and may be
 * reused.
 *
 * @param resource $socket A valid socket resource created with socket_create.
 * @return resource Returns a new socket resource on success. The actual
 * error code can be retrieved by calling
 * socket_last_error. This error code may be passed to
 * socket_strerror to get a textual explanation of the
 * error.
 * @throws SocketsException
 *
 */
function socket_accept($socket)
{
   
error_clear_last();
   
$result = \socket_accept($socket);
    if (
$result === false) {
        throw
SocketsException::createFromPhpError();
    }
    return
$result;
}

/**
 * Create a Socket resource, and bind it to the provided AddrInfo resource.  The return
 * value of this function may be used with socket_listen.
 *
 * @param resource $addr Resource created from socket_addrinfo_lookup.
 * @return resource Returns a Socket resource on success.
 * @throws SocketsException
 *
 */
function socket_addrinfo_bind($addr)
{
   
error_clear_last();
   
$result = \socket_addrinfo_bind($addr);
    if (
$result === null) {
        throw
SocketsException::createFromPhpError();
    }
    return
$result;
}
lexkrstn at gmail dot com 05-Nov-2018 06:21
It seems like the flags are just passed to the underlying recv() function of your OS, hence there no MSG_DONTWAIT flag on Windows and you should not define it yourself in that case, it just won't work.
e-vela at bol dot com dot br 23-Jul-2017 07:39
Usage example for MSG_PEEK: this function tells if the socket has data available to be read, but preserving it to be read at a future moment.

<?php
// Workaround for the missing define
if(!defined('MSG_DONTWAIT')) define('MSG_DONTWAIT', 0x40);

// Function to check if there is data available in the socket
function SocketHasData($socket) {
   
// Based on the following fact:
    // $result=0 -> disconnected, $result=false -> no data

   
$data = ''; // We need a buffer, but we won't use it

    // MSG_PEEK means to preserve data in the queue, so it can
    // actually be read afterwards
   
$result = socket_recv($socket, $data, 1, MSG_PEEK | MSG_DONTWAIT );

    if (
$result === false) return false; // If no data, returns false
   
return true; // Otherwise returns true
}
?>
cottton at i-stats dot net 13-Oct-2014 02:17
socket_recv()
returns FALSE if client returned no data
returns 0 (zero) if client disconnected

also (asuming case socket_select() "gave" us a "changed" socket):
if
socket_recv() returned FALSE
and no bytes were received
then
client "crashed" (call it disconnected).

else if
socket_recv() returned 0 (zero)
and no bytes were received
then
client "normaly" disconnected.

Im pretty sure -- 99.99%.
Example:
<?php
function receive($socket)
{
   
// !
    // on all following cases we assume that
    // socket_select() returned the current socket as "changed"
    // !

   
$timeout = 3; // set your timeout

    /* important */
   
$socket_recv_return_values['no_data_received'] = false;
   
$socket_recv_return_values['client_disconnected'] = 0;

   
$start = time();
   
$received_data = null;
   
$received_bytes = null;
   
socket_set_nonblock($socket);
   
socket_clear_error();
    while(
        (
$t_out=((time()-$start) >= $timeout)) === false
       
and ($read=@socket_recv($socket, $buf, 4096, 0)) >= 1
   
){
       
$received_data  = (isset($received_data)) ? $received_data . $buf : $buf;
       
$received_bytes = (isset($received_bytes)) ? $received_bytes + $read : $read;
    }
   
$last_error = socket_last_error($socket);
   
socket_set_block($socket);

    if(
$t_out === true){
        throw new
Exception(
           
'timeout after ' . ((!$received_bytes) ? 0 : $received_bytes) . ' bytes',
           
0 // your eCode here
       
);
    }
    elseif(
$last_error !== false and $last_error !== 0){
        throw new
Exception(
           
socket_strerror($last_error),
           
$last_error
       
);
    }
    else{
        if(
$read === $socket_recv_return_values['no_data_received']){
           
// client returned NO DATA
            // but we were in a loop and could have got some data before:
           
if($received_bytes < 1){
               
// client is connected but sent NO DATA ?
                // no:
                // in this case the client must be "crashed" because -
                // it is not possible to "send no data" (zero bytes)
                // socket_select() now returns this socket as "changed" "forever"
               
throw new Exception(
                   
'client crashed',
                   
0 // your eCode here
               
);
            }else{
               
// client returned DATA
               
return $received_data;
            }
        }
        elseif(
$read === $socket_recv_return_values['client_disconnected']){
           
// client disconnected
           
if($received_bytes < 1){
               
// client disconnected before/without sending any bytes
               
throw new Exception(
                   
'client disconnected',
                   
0 // your eCode here
               
);
            }
            else{
               
// *this value* ^= $socket_recv_return_values['client_disconnected']
                //
                // client disconnected AFTER sending data (we were in a loop!)
                // socket_select() will return this socket "forever" as "changed" and -
                // socket_recv() will return *this value* "forever".
                // we will be "back" again "very soon" to see:
                //  socket_recv() returns *this value* AND no bytes received
                //  which results in disconnect-exception above
               
return $received_data;
            }
        }
    }
}
?>
m_lajos at hotmail dot com 14-Jul-2014 03:45
Workaround for the missing MSG_DONTWAIT flag according to the bug report page:

<?php if(!defined('MSG_DONTWAIT')) define('MSG_DONTWAIT', 0x40); ?>
ss-130 at yandex dot ru 17-Jul-2013 11:09
<?php
$er
= error_reporting(0);
$bytes    = socket_recv($socket,$buffer,1,MSG_WAITALL);
error_reporting($er);

// MEGA BUG HERE
// this statuses are wrong and swapped, closed socket must be with "FALSE"
// but in fact he swap the values:
// http://php.net/manual/en/function.socket-recv.php
//
if($bytes===false){ // no data available, socket not closed
   
echo 'WS_READ_ERR1: '.socket_strerror(socket_last_error($socket)).PHP_EOL;
   
// print when no data available:
    // WS_READ_ERR1: Resource temporarily unavailable
   
continue;
}else if(
$bytes===0){ // socket closed
   
echo 'WS_READ_ERR2: '.socket_strerror(socket_last_error($socket)).PHP_EOL;
   
// print when socket closed:
    // WS_READ_ERR2: Success
   
$process->close();
}

?>
davide dot renzi at gmail dot com 01-Mar-2012 08:50
In PHP version 5.* there is a bug: MSG_DONTWAIT flag is not defined (see https://bugs.php.net/bug.php?id=48326)
rathamahata at rathamahata dot net 25-Aug-2005 04:44
It looks like that mysterious flags are just the recv(2) flags passed to your OS syscall and nothing more...

ext/sockets/sockets.c:PHP_FUNCTION(socket_recv)
...
        if ((retval = recv(php_sock->bsd_socket, recv_buf, len, flags)) < 1) {
                efree(recv_buf);
...

for linux you can type `man 2 recv' and you will see complete description of thouse flags.

Sergey S. Kosrtyliov <rathamahata@rathamahata.net>
http://www.rathamahata.net/
06-May-2005 04:59
My last post was incorrect. The int flag set to 2 apparently reset the file position pointer so what I was reading was the first record repeatedly.

My workaroud ended up being the following:

for($ct=1; $ct<=$numrecs; $ct++) {
    $rec = "";
    $nr=socket_recv($fp,$rec,76,0);
       
    //grab the extra bytes.
    $terminator = "";
    while ($terminator != ".") {
        $nr=socket_recv($fp,$terminator,1,0);
    }
   
     $custarray[]=substr($rec,0,76);        
}

Martin K.
05-May-2005 07:42
I'm glad that Bastion left the above post about the mysterious int flag. He just helped to fix a problem that I've spent six hours on. Here's my code:

for($ct=1; $ct<=$numrecs; $ct++) {
     $rec = "";
     $nr=socket_recv($fp,$rec,77,0);
     print "Rec # $ct -->";
         print "$rec";
         print "<br>";
      }

The code is pretty simple, it just loops through all my records and prints them out. All records are 77 bytes and all end with a period. The first 36 records print perfectly then at 37 things go bad. The records start to get offset. The last few characters of the 37th record end up printing on the 38th record. The data on the sending side was perfect, so I knew that the problem was with socked_recv.

After reading the above post I tried changing the int flag. Changing the flag to 2 worked:
$nr=socket_recv($fp,$rec,77,2);

Now everything lines up perfectly. I had always left int flag as 0 since it's undocumented.

Martin K.
engine at [NO SPAM] illusiononly dot com 30-Nov-2004 04:58
To read from socket both on linux and windows OS having  flash as a client I use function bellow. $length is the size of  a chunk, not the max length to read. It will continue reading until EOL char  occures or client disconnects (or in case of error), so it works for bigger packets as well.

     function read($descriptor, $length = 1024) {
            $this->method = "read";
            if(!$client){
                echo("No valid socket descriptor !\n");
                return false;
            }
            $read ='';
        while(($flag=socket_recv($descriptor, $buf, $length,0))>0){
              $asc=ord(substr($buf, -1));
            if ($asc==0) {
                $read.=substr($buf,0,-1);
                break;
            }else{
                $read.=$buf;
            }
        }
           if ($flag<0){
            //error
            return false;
        }elseif ($flag==0){
            //Client disconnected
            return  false;
        }else{
              return $read;
        }

     }
dgk at tcde dot ru 05-Nov-2004 03:57
I've used socket_select and socket_recv with a while loop and found myself in trouble when remote side closed connection. The code below produced infinite loop and socket_select returned immediately (which lead to high cpu time consumption).

<?

socket_set_nonblock($my_socket);
$streams = array($my_socket/*, ... */);

$lastAccess = time();
while (socket_select($streams, $write = NULL, $except = NULL, SLEEP_TIME_SECONDS, SLEEP_TIME_MILLISECONDS) !== FALSE) {
    if (in_array($my_socket, $streams)) {
        while (@socket_recv($my_socket, $data, 8192, 0)) {
            echo $data;
        }
        $lastAccess = time();
    } else {
        if (time()-$lastAccess > LAST_ACCESS_TIMEOUT) {
            break;
        }
    }
    // ...
    $streams = array($my_socket/*, ... */);
}

?>

The solution was simple, but quite hard to find because socket_recv is not documented. socket_recv returns FALSE if there is no data and 0 if the socket is widowed (disconnected by remote side). So I had just to check return value of socket_recv. The problem now sounds stupid, but I've spend some time to find it out.
I hope this will save some of somebody's hair ;)
bastiaan at [no-spam] megabass dot nl 05-Apr-2004 09:35
in case you want to empty/unset $buffer, but failing to do so, try using 0 as flag.
PHP_NORMAL_READ and PHP_BINARY_READ respectively hold 1 and 2 as value.
PHP8中文手册 站长在线 整理 版权归PHP文档组所有